Peanut Brittle (Easiest Microwave Recipe!) - Cooking Classy (2024)

FAQs

Why is my microwave peanut brittle too hard? ›

Why is my microwave peanut brittle too hard? This is a common problem when the mixture gets too hot. This can happen if you cook it for too long.

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

#1 - Store in an airtight container

It should come as no surprise that storing your peanut brittle in airtight containers is one of the best ways to store peanut brittle. Keeping air out helps maintain your brittle's freshness by minimizing the amount of moisture that might come into contact with your sweet treat.

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

You'll also want to prepare a baking sheet, with either a silicone mat or parchment paper. The mat/paper will help ensure the peanut brittle doesn't stick directly to pan once it has cooled.

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky.

If your peanut brittle reached 311°F but is a pale milky color, it's likely the candy cooked too quickly.

Reviving stale peanut brittle is possible to some extent. You can try placing the stale peanut brittle on a baking sheet and gently heating it in an oven at a low temperature, around 250°F (120°C), for a few minutes. This can help to soften it a bit and restore some of its original texture.

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

Why is my peanut brittle gooey? ›

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy. If you have this issue, next time, use a thermometer to make sure the peanut brittle mixture gets to 300°F.

With a higher number of micro-crystals, the sugar has more sites on which to crystallize, and so crystallization ultimately happens faster. Having said all of that — if you don't have a piece of stone, you can used a buttered rimmed baking sheet or one lined with a nonstick silicone baking sheet.

Package up broken peanut brittle in cookie tins or wrapped up in candy cellophane for gifting during the holidays. Or large covered mason or French canning jars are nice, as they are reusable and keep out moisture, which can make any candy sticky.

Put it in a pan on low heat and very slowly melt it. Once it begins to melt you can increase the heat a bit. The trick to this is that you have to stir it constantly in order to keep the peanuts from burning. You're going to want to bring it back to 300F, then immediately pour into the prepared pan.

Thoroughly rinse the raw unshelled peanuts in water. Put the water, salt, seasoning, peanuts in a large stockpot, bring to a boil: Cover and reduce the heat just enough to maintain a low boil. Boil for 2 to 3 hours or longer (some boil their peanuts all day), until peanuts reach desired level of softness.

Place the peanut butter in the microwave, and heat it for 30 seconds. Once the 30 seconds is up, stir the peanut butter to makes sure it's melting evenly. Place the peanut butter back in the microwave for another 30 seconds, and stir again. This will probably take a few rounds to get to your desired consistency.

When using peanut butter only, the key is heat. Peanut butter is naturally high in fat, but that fat is nearly solid at room temperature. In order to soften it up, you need some heat. In my case, I heated two tablespoons in a heat-proof bowl and then stirred like crazy.